Araldite Rapid Epoxy gives a 5 minute working time

• 2 x tubes
• 15ml
• Working time: 5 minutes
• Handling time: 20 minutes
• Full strength: 2 hours

For best results: clean, dry and thoroughly roughen surfaces to be joined.

Remove caps. Pierce end of tubes. Squeeze equals length of harder and resin onto a clean, discardable surface. Squeeze with equal pressure from bottom of tubes so that bead diameters are uniform.

Mix thoroughly.

Apply to surface(s) to be joined together. When storing, clean caps and tube threads. Replace caps to original tube (colour coded), or hardening may occur in the tube nozzles

Epoxy adhesives cure and join things together by a chemical reaction between the resin and hardener. This reaction results in high strength bonds that are resistant to most chemicals.