High Gloss Wax - Chestnut Products

Chestnut Products High Gloss Wax is a blend of high quality waxes rich in carnauba wax – a wax which is known for its high level of gloss.

High Gloss Wax should be used over one of the Chestnut Products sanding sealers and allowed to dry (about 20 minutes) before buffing to a shine. For best results apply a very thin coat, spreading the wax evenly over the entire surface.

High Gloss Wax can also be used on the Buffing Wheel System. In this situation use the A and B Wheel as normal, then apply the Microcrystalline Wax to the item you are polishing. Allow 10 minutes for the wax to dry then buff as normal using the C Wheel. You can use the same C Wheel for both High Gloss Wax and the Carnauba Wax Stick.

High Gloss Wax has been tested to the EN71 Part 3 regulations regarding coatings used on toys. High Gloss Wax is formulated entirely from food-grade ingredients; in the absence of a suitable official test, Chestnut Products would consider that once the solvent has fully evaporated, it is safe for food contact.