Small Buffing Tree Mandrel

This small buffing tree mandrel is available separately or come as part of the Buffing Wheel Kit. It should be used with the Chestnut Buffing Tree.

The mandrel is made in the UK and are zinc plated for maximum protection. Due to the limitations of plating a blind hole, care should be taken to ensure the tapped thread of the large mandrel stays as dry as possible.

The small mandrel is designed to be held in a jacobs chuck or similar and is especially suited to use with the smaller 4 inch wheels and the Dome Buffs.

Length: 60mm

Diameter: 9mm (chuck fitting)

Construction: Mild Steel, Zinc Plated

Tapped thread: M8

The image shows both the large & small mandrel, the small mandrel only will be sent